overthinkos/pull

ov image pull -- Fetch Image Into Local Storage

Overview

ov image pull fetches an image from its registry into the local container engine's storage so deploy-mode commands (ov shell, ov start, ov config, ov alias add, etc.) can read its OCI labels via ExtractMetadata. It is a pull-only operation — it does not start, configure, or restart any service. That's ov update's job (see /ov:update).

This command is the prerequisite for every deploy-mode operation on a fresh host. Since the ov image refactor, deploy-mode commands no longer read image.yml — they read OCI labels + deploy.yml only. If an image isn't in local storage, the label read fails and the CLI surfaces a friendly recommendation pointing here.

Quick Reference

| Action | Command | Description | |--------|---------|-------------| | Pull short name | ov image pull jupyter | Resolves registry + tag via image.yml (requires project directory) | | Pull fully-qualified ref | ov image pull ghcr.io/overthinkos/jupyter:2026.108.56 | Pulls as-is, works from anywhere | | Pull remote project ref | ov image pull @github.com/org/repo/image:v1 | Downloads repo, reads its image.yml, pulls registry ref | | Override tag (short name) | ov image pull jupyter --tag 2026.108.1 | Pull a specific CalVer tag | | Override platform | ov image pull jupyter --platform linux/arm64 | Pull a specific platform |

Three Input Forms

1. Short name (requires project directory)

cd ~/overthink && ov image pull jupyter

Resolves <registry>/jupyter:<tag> via image.yml. Equivalent to the two-step:

ov image inspect jupyter --format registry  # ghcr.io/overthinkos
ov image inspect jupyter --format tag       # ghcr.io/overthinkos/jupyter:2026.108.56
# …then podman pull <that-ref>

…but packaged as a single command.

2. Fully-qualified ref (no project required)

ov image pull ghcr.io/overthinkos/jupyter:2026.108.56

Runs podman pull <ref> directly. Useful from any directory, including /tmp. Supports any registry that the underlying engine (podman/docker) can authenticate against.

3. Remote project ref (@github.com/...)

ov image pull @github.com/overthinkos/overthink/jupyter:2026.108.56
ov image pull @github.com/overthinkos/overthink/jupyter          # latest git tag

Downloads and caches the repo, reads its image.yml, then pulls the registry ref declared there. This is the only place @github.com/... refs are accepted in ov. Deploy-mode commands (ov shell, ov start, ov config, etc.) reject them with a message pointing users here.

Semantics

• Idempotent. Running ov image pull jupyter twice with the image already local is a no-op (the engine's pull is layer-aware).
• No side effects on services. Unlike ov update, this command does not restart, reconfigure, or touch any running container.
• Prints the resolved ref on success. One line to stderr.
• Respects engine selection. Uses the run engine from ResolveRuntime (podman by default; docker if configured).

Interaction with ErrImageNotLocal (the sentinel pattern)

The CLI has a centralized design for "image not in local storage" errors. Every deploy-mode command inherits the same friendly recommendation without per-call-site code:

1. ExtractMetadata(engine, imageRef) in ov/labels.go returns ErrImageNotLocal (wrapped with the image ref) when the image is absent from local storage.
2. EnsureImage(imageRef, rt) in ov/transfer.go returns the same sentinel when the image is absent from both run and build engines.
3. FormatCLIError in ov/image.go unwraps the sentinel at the top-level error boundary in main() and renders:

Error: image "X" is not available locally.
       Run 'ov image pull X' to fetch it first

Any deploy-mode command that calls ExtractMetadata or EnsureImage (shell, start, stop, config, deploy, update, remove, alias, vm, service, cdp, wl, vnc, tmux, record, dbus, logs — essentially everything outside ov image) automatically participates. If you're authoring a new command that reads image metadata, just call ExtractMetadata and the recommendation falls out for free.

Interaction with ov update

| Aspect | ov image pull | ov update | |---|---|---| | Side effects | None. Pulls bytes, prints digest. | Pulls, seeds data into volumes, restarts active service. | | Required before deploy | Yes (first time only). | No — it calls pull internally if needed. | | Use when | You want labels available but aren't ready to deploy. Or just installed ov on a fresh host. | You have a running service and want to roll to a new image version. |

Rule of thumb: pull is the prerequisite; update is the refresh. Use ov image pull <image> once to seed local storage; use ov update <image> every time you bump the version afterward.

Flags

• --tag <tag> (default: latest) — Image tag when resolving a short name. Ignored for fully-qualified or remote-project refs (the tag is embedded in the ref).
• --platform <platform> — Target platform (default: host). Passed to podman pull --platform.

Typical Workflows

Fresh host, new user

# Install ov (see README Install section)
ov image pull jupyter                # pull once; labels now readable
ov config jupyter                    # generate quadlet from labels + deploy.yml
ov start jupyter                     # systemctl --user start

Deploying a remote image

ov image pull @github.com/overthinkos/overthink/hermes:latest
ov config hermes
ov start hermes

Fixing a broken deploy-mode command

ov shell jupyter
# Error: image "jupyter:latest" is not available locally.
#        Run 'ov image pull jupyter:latest' to fetch it first
ov image pull jupyter:latest          # follow the recommendation
ov shell jupyter                      # now works

Why this command exists

Before the ov image refactor, deploy-mode commands had dual-mode logic: try image.yml first, fall back to OCI labels. That produced drift (the two paths could diverge) and silently pulled-and-built remote refs as a side effect of what looked like a simple ov shell @github.com/... call.

The refactor drew a hard line: deploy-mode commands read labels only; build-mode commands (ov image …) read image.yml only. ov image pull is the bridge — it takes a build-mode identifier (short name or remote repo ref) and produces a deploy-mode-consumable artifact (labels in local storage).

Project directory override

ov image pull resolves image.yml via os.Getwd() when given a short name (to resolve registry + tag). Override with -C <dir> / --dir <dir> / OV_PROJECT_DIR=<dir>. Fully-qualified refs and @github.com/... remote refs don't need a project dir. See /ov:image "Project directory resolution".

Cross-References

• /ov:image — family overview; ov image pull is one of 8 subcommands.
• /ov:build — pulls and builds are orthogonal; build creates images, pull fetches existing ones.
• /ov:update — rolls deployed services to a new image version (pulls + data-seeds + restarts).
• /ov:inspect — print resolved ref from image.yml without pulling.
• /ov:shell, /ov:start, /ov:config, /ov:alias, /ov:vm — deploy-mode commands that require a pulled image.
• /ov:deploy — deploy.yml overlay semantics applied on top of the labels pull materializes.
• /ov-dev:go — ErrImageNotLocal / EnsureImage / ExtractMetadata source locations (ov/labels.go, ov/transfer.go, ov/image.go).