neekware/artifacts/bundle/skills/ehaye/telegram-setup

Telegram Setup for ehAye Dojo

This skill is your playbook when a user asks Dojo to set up Telegram on their machine and you cannot see the project source. Walk them through the Personal bots flow first — it is the recommended product path. Only fall back to Group setup if they explicitly want shared/team visibility.

Mental model (read first)

ehAye Engine has two Telegram flavors. Only one is active at a time:

| Flavor | When to use | Listens to | Sends to | | --------------------------- | ------------------------------------------ | ------------------------------------------------ | ------------------------ | | Personal bots (default) | A single user, private 1:1 chats | Their paired private Telegram chat per Dojo lane | Same paired private chat | | Group setup (advanced) | Teams, observers, demos, shared visibility | Configured Telegram group chat IDs | Same groups |

Hard rules to enforce in your guidance:

• The user selects exactly one flavor in Settings → Remote Access & Notifications → Telegram. The other flavor’s saved keys stay on disk but are dormant.
• The top Enabled switch is the master kill switch for Telegram.
• Personal mode pairs each Dojo lane (Primary, Secondary) to its own private Telegram bot. Each lane is independent — they can configure just Primary, just Secondary, or both.
• Group mode reuses one bot in two Telegram groups, with chat IDs.
• Dojo doesn’t care which flavor feeds it. It routes by Primary/Secondary role.
• PIN and wake-word features were removed from the product. Do not ask the user about them.

If you ever see PIN/wake-word in screenshots or older docs, treat them as out-of-date and skip.

---

Personal bots (recommended flow)

Per-lane outcome

After setup, each lane the user configures will have:

• one Telegram bot they created via BotFather
• the bot paired to their personal Telegram account via a one-time /ehaye:pair <code> message
• Dojo accepting inbound only from that paired private chat, and sending outbound to that same paired chat

No groups. No admin rights. No privacy-mode toggles. No chat ID hunting. No getUpdates.

Walk the user through this

For each lane the user wants (start with Primary):

1. Open BotFather

   • In Telegram, open @BotFather (verified blue checkmark).

2. Create a bot

   • Send /newbot.
   • Display name: anything (e.g. Dojo Primary or Val Dojo).
   • Username: must end in _bot (e.g. val_dojo_primary_bot). Try variants if taken.

3. Copy the bot token

   • BotFather returns a token like 123456789:ABC....
   • Treat it like a password. Do not echo it in chat. Don’t commit it.

4. Open Dojo Settings

   • ehAye Engine → Settings → Remote Access & Notifications → Telegram.
   • Make sure the Personal bots card is selected (it shows the small green checkmark).

5. Paste the token

   • Paste into Primary private bot (or Secondary private bot for the secondary lane).
   • Click Connect.

6. Pair the bot

   • Dojo shows a pairing dialog with a command like /ehaye:pair 482913.
   • The dialog has Open bot in Telegram and a copy icon.
   • In Telegram, open the new bot and send the exact /ehaye:pair <code>.
   • Return to Dojo and click Check pairing.
   • On success Dojo saves the private chat and shows Connected to <Name> (@username) in green.

7. Save and enable

   • Make sure the top Enabled switch is on.
   • Click Save.

8. Smoke test

   • In the bot chat send hey or any short message.
   • Dojo Primary should respond and Telegram should show a reply.
   • The pairing-only chat is the only chat that can reach Dojo through this bot.

Repeat for Secondary if the user wants it. Skipping Secondary is fine.

Remote control while on the move

Once a lane is paired, these commands work in that bot chat:

| Type | Meaning | | ---------------------------- | -------------------------------- | | help or 1 | Show help | | status or 2 | Show this lane’s Telegram status | | telegram on or 3 | Turn this lane’s Telegram ON | | telegram off or 4 | Turn this lane’s Telegram OFF | | verbosity brief or 5 | Brief replies | | verbosity talkative or 6 | Paragraph replies | | verbosity chatty or 7 | Detailed replies |

3 / 4 toggle the per-lane flag, not the master switch. The master Enabled switch in Settings is the only way to disable the whole Telegram integration.

What you’re telling the user is happening behind the scenes

• Dojo verifies the bot token via Telegram getMe.
• Dojo generates a 6-digit pairing code.
• Dojo polls bot updates and looks for a private message from a real Telegram user whose text is exactly /ehaye:pair <code>.
• It stores chatId, userId, bot username, and pairedAt.
• Inbound messages are then accepted only when: token matches, chat type is private, chat ID matches, and sender user ID matches.
• Outbound goes to the same paired chat.

---

Group setup (advanced flow)

Use this only when the user explicitly wants a team/observer/demo experience. It is more work and exposes group access-control decisions to the user.

High level:

• 1 Telegram bot via BotFather (privacy mode disabled).
• 2 Telegram groups (Primary, Secondary), bot added as admin to both.
• Capture each group’s chat ID (negative -100…).
• Paste token + chat IDs into the Group setup card.

Walk them through it

1. Create the bot — @BotFather → /newbot. Copy the token.
2. Disable privacy mode — BotFather → /setprivacy → select the bot → Disable.
   • If the bot was already in a group, remove and re-add it. Telegram only applies the new privacy setting on re-join.
3. Create two groups in Telegram:
   • ehAye Dojo (P) for Primary
   • ehAye Dojo (S) for Secondary
4. Add the bot to both groups and promote to admin. Bot needs to read messages and post replies.
5. Get each chat ID (negative -100…). Two reliable methods:
   • Send a message in the group, then open: https://api.telegram.org/bot<BOT_TOKEN>/getUpdates Look for chat.id and chat.title matching the group. Copy the negative number.
   • Or use a chat-ID helper bot the user trusts.
6. Lock down the groups (optional but recommended) — restrict who can send messages, especially if it’s a private group meant for one user.
7. Open Dojo Settings → Telegram:
   • Select the Group setup card.
   • Paste the bot token into Group Bot Token.
   • Paste Primary Chat ID and Secondary Chat ID.
   • Click Test next to each chat to verify a message arrives.
8. Save and turn the top Enabled switch on.

Group safety guidance

• Private group: discoverable only by invite link. Recommended for solo users using groups.
• Public group: anyone can search/join. Dojo will show a one-time informational notice and continue working — the user is responsible for membership.
• If the user wants the group to be read-only for everyone except themselves and the bot, set group permissions accordingly.

ehAye Engine no longer enforces a PIN or wake-word for Telegram commands. Trust is delegated to Telegram group membership/permissions.

---

How to choose for the user

Ask: “Are you setting this up for just you, or do you want others to see/use Dojo through Telegram?”

• Just me → Personal bots.
• Team / observers / demos / shared → Group setup.
• Both → Configure Personal for daily use; Group only when they need shared visibility. Only one is active at a time. Saved keys for the other flavor stay on disk and can be flipped back later by switching the card and clicking Save.

---

Troubleshooting cheat sheet

| Symptom | Likely cause | Fix | | ------------------------------------------------- | -------------------------------------------------------------------- | --------------------------------------------------------------------------------------------------------------------------- | | Pairing never completes | Wrong bot opened in Telegram, code mistyped, or code expired | Click Connect again to get a fresh code; ensure the bot username in the dialog matches the bot in Telegram | | Pairing succeeds but bot ignores messages | Lane Telegram is off (primaryTelegram/secondaryTelegram) | Send 3 in the bot chat (or telegram on); or toggle in Settings | | Personal bot suddenly silent | Master Enabled is off, or mode switched to Group setup | Re-enable master switch; reselect Personal bots | | Group bot replies but UI never showed the message | A stale ehAyeEngine process is running from an old install/dev build | Quit /Applications/ehAyeEngine.app (and its sidecar) and any older dev backends; only one Telegram process should be live | | Group setup test message fails | Bot is not in the group, not an admin, or wrong chat ID | Re-add bot as admin, recheck chat ID via getUpdates | | Group bot reads /commands only | Privacy mode is still enabled | BotFather → /setprivacy → Disable, then remove and re-add the bot to the group | | User reports two messages on each reply | Both Personal and Group were briefly enabled by old code | Confirm there’s only one ehAyeEngine process; switch mode and save once to settle settings |

If something’s still wrong: look at temp/ehaye/logs/be/ehaye-d-be-*.log. Telegram lines are prefixed 📨 TelegramService. Confirm there’s only one backend process talking to Telegram.

---

What you should never tell the user

• Don’t ask them to set a PIN. It was removed.
• Don’t ask them to set a wake word. It was removed.
• Don’t tell them they need both Personal and Group at once.
• Don’t tell them to delete their saved Group token when they switch to Personal — the app keeps both safely; the other flavor just goes dormant.
• Don’t paste their bot token back to them in chat. Have them paste it directly into the Settings field.

---

Optional: Telegram for ehAye Portal

If a user also wants Portal alerts (separate product from Dojo):

• They can create a separate Telegram bot or reuse one.
• Set TELEGRAM_BOT_TOKEN (and recipient chat ID) in Portal env.
• For one-way alerts, privacy mode can stay enabled.
• Disabling privacy mode is only required if Portal also reads replies.

This is independent of the Dojo flavor selected above.

---

BotFather quick reference

| Command | Purpose | | ------------- | ------------------------------------------- | | /newbot | Create a new bot | | /mybots | List/manage your bots | | /setprivacy | Toggle group privacy mode (group flow only) | | /setname | Rename the bot | | /setuserpic | Set bot avatar | | /revoke | Revoke the bot token (issues a new one) |

If a token leaks: /revoke immediately, then paste the new token into the same Primary private bot or Secondary private bot field and re-pair.

Creator: Ehaye License: MIT Source Repo: neekware/ehaye-skills Source Bucket: ehaye Original Path: ehaye/telegram-setup